Blog
Blog
Air Sampling for Mold Inspections
Air Sampling for Mold Inspections by Nick Gromicko, CMI® and Ethan Ward During a mold inspection, taking air samples is crucial for several reasons. Mold spores aren't visible to the naked eye, and laboratory analysis of air samples can identify the types of mold...
Asbestos Cement Siding Inspection
Asbestos Cement Siding Inspection by Nick Gromicko, CMI® Asbestos cement is a composite material made from Portland cement reinforced with asbestos fibers. Manufacturers popularized asbestos cement siding before banning it in the U.S. in the 1970s. During inspections,...
SCAQMD Rule 1403 Procedure 5 Cleanup Plan
Understanding SCAQMD Rule 1403 Procedure 5 Cleanup Plan The South Coast Air Quality Management District (SCAQMD) has established Rule 1403 to regulate asbestos emissions from demolition and renovation activities. Among the procedures detailed in this rule is Procedure...
Carpeted Bathrooms
Carpeted Bathrooms by Nick Gromicko, CMI® and Kenton Shepard Carpeted bathrooms use carpeted floors instead of traditional surfaces like tile or vinyl. While carpets can enhance the bathroom's aesthetic appeal, they can also foster mold and bacteria. For this reason,...
Asbestos Regulations
What are the different regulations and laws regarding asbestos in California? In California, asbestos regulations and laws are primarily overseen by the California Department of Industrial Relations (DIR) and the California Division of Occupational Safety and Health...
Asbestos Testing of Drywall or Plaster
If your walls or ceiling are going to be opened up for repair or remodeling, it is essential to have them tested beforehand. This is required by regulations to ensure the protection of the workers and residents involved, as well as for proper disposal purposes. Most...
5 Reasons to Do a Professional Mold Inspection After Water Damage
Homeowners dread water damage because of the terrible outcomes that occur if they cannot handle it appropriately. Water damage arises due to several reasons. It can be from an overflowing sink, damaged plumbing, broken window, flooding from natural disasters, or a...
3West Environmental, Inc. Earns 2020 Best of Porch Award
3West Environmental, Inc. Earns 2020 Best of Porch Award Award reflects company’s consistently high level of customer service San Clemente, CA, February 17, 2021 – 3West Environmental, Inc. is proud to announce that it has earned the home service industry’s coveted...
Asbestos: Facts and Tips for Home Inspectors and Homeowners
What Is Asbestos? Asbestos is a mineral fiber that can be positively identified only with a special type of microscope. There are several types of asbestos fibers. In the past, asbestos was added to a variety of products to strengthen them and to provide heat...
Air Sampling for Mold Inspections
Taking air samples during a mold inspection is important for several reasons. Mold spores are not visible to the naked eye, and the types of mold present can often be determinair sampleed through laboratory analysis of the air samples. Having samples analyzed can also help provide evidence of the scope and severity of a mold problem, as well as aid in assessing human exposure to mold spores. After remediation, new samples are typically taken to help ensure that all mold has been successfully removed.